Good to see you
Otherwise login by email.
Welcome to Dulux Trade
Otherwise login by email.
Terms and Conditions
Thanks! for registering
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
Would you spare a minute to answer 3 questions
Registration complete
Successfully registered, please login
Delete Account
AquaMax Water-Based Satinwood PBW
-
Excellent coverage
-
Smooth application
-
Hard-wearing
-
Water-Based
-
Interior & exterior
-
Finish Mid Sheen
-
Coverage A guide to the practical coverage which can be achieved under normal conditions is up to 18m² per litre.
-
Drying Time 1-2 hours
-
Recoatable 2-4 hours
-
Thinning Thinning is not usually necessary, but if required add up to 1 part clean water to 10 parts paint.
-
EASY TO APPLY
-
QUICK DRYING
-
WATER BASED, LOW ODOUR
Product Description
Application Description
Technical & Safety Documentation
Colour Range
Tips & Advice
-
1. Preparing the SurfacesTo get the best results, ensure surfaces to be painted are sound, clean, and dry (new surfaces particularly must be fully dry). Remove all loose and defective coatings, if necessary, stripping back to bare wood. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Exterior: Remove and treat any mould, algae, lichen, or moss with Weathershield Multi-Surface Fungicidal Wash*. Remove defective glazing material, clean the rebates and any loose or open joints. Replace any rotten wood and troublesome knots with new timber. Thoroughly rub down previously painted surfaces, using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth. Apply 1 or 2 coats of an appropriate knotting solution to treat any remaining knots in wood. Any surface defects should be filled with the appropriate Polycell product. Prime then Undercoat all new or bare wood with 2 coats of Dulux AquaMax Primer Undercoat,
including any new or replacement beading.
Prime any new bare metal with appropriate Dulux
Trade Metalshield Primer. Then undercoat with Dulux AquaMax Primer Undercoat. Fill any surface defects, open joints etc. and
replace any missing glazing material. New joinery
is often factory primed using a satin basecoat (also called a dual-purpose primer). These materials quickly erode when left exposed and may need to be re-primed. -
2. CleaningAfter use remove as much product as possible from equipment before cleaning with water. When this paint container is empty please ask
-
3. StoringDo not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save Color
Save to My Workspace
Add to job
AquaMax Water-Based Satinwood PBW
Save to My Workspace