Products
Products
AquaMax Water-Based Primer Undercoat

AquaMax Water-Based Primer Undercoat

UNDERCOAT WHITE

Only 1 Colour is Available

Size

750ML 2.5L 5L

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Excellent coverage
Smooth application
Water based
Interior and exterior

Technical Information

Finish N/A
Coverage A guide to the practical coverage which can be achieved under normal conditions is up to 13m² per litre.
Drying Time 1-2 hours
Recoatable 2-4 hours
Thinning Sealing new or bare surfaces- Add up to 1 part clean water to 10 parts paint. Normal use (not to be exceeded)- Add up to 1-part clean water to 10 parts paint. Conventional spray application- Add up to 1-partclean water to 2.5 parts paint. Airless spray application- Add up to 1-part clean water to 5 parts paint

Product Features

EASY TO APPLY
WATER BASED, LOW ODOUR
UNDERCOAT

Product Description

Suitable for use on interior and exterior soft and hardwoods. Not recommended as a primer for metal, plaster, brickwork, rendering, asbestos, cement, or rough surfaces. Do not use on heated surfaces.

Application Description

Brush, roller and airless or conventional sprays. Do not use when the temperature falls below 10ºC or outside when there is a likelihood of rain.

Technical & Safety Documentation

If you need further support, please contact the Dulux Technical Advice Centre on +353 21 422 0222. Always read full Health, Safety & Environmental Information on can before use.Safety datasheet is available free on request by telephoning the Dulux Technical Advice Centre or by visiting dulux.ie

Download Adobe Reader

Colour Range

Undercoats

Tips & Advice

1. Preparing the Surfaces

To get the best results, ensure surfaces to be painted are sound, clean, and dry (new surfaces particularly must be fully dry) and free from all defective or poorly adhering material such as dirt, grease, or wax.
Thoroughly rub down previously painted surfaces, using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.Treat any knots in wood with an appropriate knotting solution. Any surface defects should be filled with the appropriate Polycell product.
2. Cleaning

After use, remove as much product as possible from equipment before cleaning with water. When this paint container is empty, please ask your stockist about recycling. If you have leftover paint, please dispose of it responsibly and consider donating it to Community RePaint. Find out more at Dulux.ie
3. Storing

Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator