Armstead Trade Quick Dry wood Primer Undercoat

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key benefits
  • Quick drying
  • Excellent adhesion
  • For interior and exterior use
  • Water based
  • High Opacity
Technical characteristics
Technical Information
  • Finish Soft Gloss
  • Coverage 12m² per litre.
  • Thinning New/bare surfaces: Up to 1 part clean water to 5 parts paint. Normal use: Up to 1 parts clean water to 10 parts paint. Conventional spray application- add up to 1 part clean water to 5 parts paint. Spray application – add up to 1 part clean water to 5 parts paint. New/bare surfaces: Up to 1 part clean water to 5 parts paint. Normal use: Up to 1 parts clean water to 10 parts paint. Conventional spray application- add up to 1 part clean water to 5 parts paint. Spray application – add up to 1 part clean water to 5 parts paint.
Product Features
  • QUICK DRYING

Product Description

Armstead Trade quick dry wood primer undercoat is a professional quality, fast drying, water-based wood primer with good opacity and excellent adhesion that does the work of both a primer and an undercoat. Suitable for both interior & exterior use.

Application Description

Brush, roller, spray, or airless spray. Do not apply in temperatures below 8 Deg C

Technical & Safety Documentation

Keep out of reach of children. If medical advixe is needed, have product container or label at hand. Do not get in eyes, on skin, or on clothing. Call a POISON CENTER or doctor/physician if you feel unwell. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains: 1, 2-benzisothiazol-3(2H)-one, reaction mass of: 5-chloro-2-metyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction. Avoid the inhalation of dust . Wear suitable face mask if dry sanding. Special precautions to be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead. EU limit for this product (cat: A/d): 130g/l (2010). This product contains max/ 30g/l VOC. For firther advice contact the Customer Advice Centre at Dulux Paints Ireland Ltd. Commons Road, Cork. Tel:021-4220222 Fax: 021-4220205 Mail: Marketing@dulux.ie. This product is manufatured in the Republic of Ireland.
  • TDS AM QUICK DRY WOOD PRIMER UNDERCOAT.pdf
  • am_gb_en_quick_dry_wood_primer_undercoat.pdf
  • am101_qd_wood_primer_undercoat.pdf

System information

STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a first coat of Armstead Trade Undercoat) followed by 1 or 2 coats of Armstead High Gloss.
For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.

Tips & Advice

  • 1. Cleaning
    After use, remove as much product as possible from equipment before cleaning with clean water.
  • 2. Storing
    Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright.