Products
Products
Armstead Trade Undercoat

Armstead Trade Undercoat

White

Change Colour

Size

2.5L 5L

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Good opacity
Low sheen
For interior & exterior use
Solvent based

Technical Information

Finish soft sheen
Coverage 16m² per litre.
Thinning Do not thin

Product Features

HIGH OPACITY

Product Description

Armstead Trade UNDERCOAT is a professional quality, solvent-based undercoat, suitable for use on all types of interior and exterior wood, metal and suitably primed masonry surfaces. Recommended for use with Armstead Trade High Gloss where durable high gloss system is required.

Application Description

Brush or roller.
Do not apply in temperatures below 8 Deg C

Technical & Safety Documentation

Contains Naptha (petroleum), hydrotreated heavy flammable liquid and vapor. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Keep away from heat, sparks, open flames and hot surfaces. No smoking. Keep container tightly closed. Do not get in eyes, on skin or on clothing. Call a POISON CENTER or doctor/ physician if you feel unwell. Keep cool. Dispose of contents and container in accordance with all local, regional, national or international regualtions. Contains 2-butanone oxime. May produce an allergic reaction. Repeated exposure may cause skin dryness or cracking. Avoid the inhalation of dust. Wear suitable face mask if dry sanding. Special precautions shoulf be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead. EU limit valu for this product (cat- A/d) 300g/l (2010). This product contains max. 300g/l VOC.

For firther advice contact the Customer Advice Centre at Dulux Paints Ireland Ltd. Commons Road, Cork. Tel-021-4220222 Fax- 021-4220205 Mail- Marketing@dulux.ie.
This product is manufatured in the Republic of Ireland.

Download Adobe Reader

Colour Range

Armstead Ready Mix

System information

STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a first coat of Armstead Trade Undercoat) followed by 1 or 2 coats of Armstead High Gloss.
For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.

Tips & Advice

1. After use

Cleaning After Final Use- Cleaning your brushes and rollers immediately after their final use ensures they can be reused for multiple projects, saving you money and reducing waste. Cleaning- 1. Remove Excess Paint- Scrape off excess paint into container for future projects. 2. Use Paint Thinner- Use a paint thinner to clean brushes and rollers. 3. Reuse Paint Thinner- Allow the paint solids to settle and reuse the thinner by pouring the clear liquid into another container. Responsible Disposal- Dispose of the remaining solids and used thinner at a hazardous waste facility. Do not pour any solvent-based paint, paint thinner or wash water down the drain or onto the ground. Do not flush paint down the drain, including when cleaning painting tools
2. Storing

Storing & Responsible Disposal Do not use or store paint in extreme temperatures and protect from frost. Whenever possible, reuse, recycle, or donate leftover paint. Find local services at mywaste.ie or consider advertising paint locally—many good causes need it to brighten community spaces. Dispose Responsibly- Never pour paint or waste washings down drains or sinks. Follow instructions at mywaste.ie to recycle empty packs. Reuse Roller Cages- Remove sleeves and store cages in a dry, dust-free place. If brushes or sleeves cannot be cleaned or reused, dispose of them in general waste to avoid recycling issues. Paint Washings- Collect used brush cleaner in a container; don't pour it into drains or on the ground. Let solids settle, pour off clear liquid into another container for reuse or disposal. Dispose of remaining solids and used cleaner at a hazardous waste facility. Do not flush paint down drains, including when cleaning tools.