Diamond Glaze Satin

Diamond Glaze Satin from Dulux is a water-based maximum durability interior clear wood varnish.

Size

2.5L 5L

Quantity

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Diamond Tough
10 x Tougher
Water-based
Floors, doors & other joinery

Technical Information

Finish Satin
Coverage 20m² per litre

Product Features

Diamond Tough
WATER BASED, LOW ODOUR

Product Description

Diamond Glaze Satin from Dulux is a water-based maximum durability interior clear wood varnish. It is a simple one pack system and is ideal for use on wooden floors and other high wear interior wood surfaces. It is up to ten times tougher than conventional varnish and is resistant to common chemicals, alcohol and water.

Application Description

STIR THOROUGHLY BEFORE USE, taking care not to use a whipping motion, which will introduce air and cause foaming when applied. Apply 2 or 3 coats of Diamond Glaze Varnish from Dulux Trade using either a brush or short pile mohair roller. Apply evenly and consistently, taking care to keep the 'wet edge' alive and finish off along the grain. Apply a small test area first to check adhesion and appearance. When recoating allow at least 2 hours between coats. Rub down lightly along the grain between coats using a fine grade adhesive paper.

Technical & Safety Documentation

Download Adobe Reader

Tips & Advice

1. Preparing the Surfaces

To get the best results, ensure surfaces to be varnished are sound, clean and dry. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
2. Cleaning

After use, remove as much product as possible from equipment before cleaning with water.
3. Storing

Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright.

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator