Good to see you
Otherwise login by email.
Welcome to Dulux Trade
Otherwise login by email.
Terms and Conditions
Thanks! for registering
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
Would you spare a minute to answer 3 questions
We will use this to provide you with useful information.
Registration complete
Successfully registered, please login
Dulux Trade High Gloss
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Tough durable finish
-
Excellent flow
-
Coverage up to 18m² per litre
-
Solvent-based
-
Finish High-gloss
-
Coverage Coverage up to 18m2
-
Composition Solvent-based
-
LONG LASTING
Product Description
Dulux Trade High Gloss is a solvent-based finish suitable for the protection and decoration of most interior and exterior surfaces where a durable high gloss finish is required.
Application Description
Brush or roller only. For Health & Safety reasons relating to all solvent-based paints, spray application is not recommended.
Technical & Safety Documentation
WARNING. Contains Naphtha (petroleum), hydrotreated heavy. Flammable liquid and vapour. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Keep away from heat, sparks, open flames and hot surfaces - No smoking. Keep container tightly closed. Do not get in eyes, on skin, or on clothing. Call a POISON CENTER or doctor/physician if you feel unwell. Keep cool. Dispose of contents and container in accordance with all local, regional, national or international regulations. Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1), 2-butanone oxime. May produce an allergic reaction. Repeated exposure may cause skin dryness or cracking. Avoid the inhalation of dust. Wear suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. EU limit value for this product (cat A/d): 300g/l (2010). This product contains max. 300g/l VOC. For further advice contact Dulux Paints Ireland
Commons Road,
Cork
Tel: 021 4220222
Colour Range
Sweet Embrace™ - Dulux Colour of the Year 2024, Colour Palette Fandeck, RAL Classic, BS4800, Dulux Ireland Mix Lab, Wild Wonder - Colour of the Year 2023, Dulux Colour of the Year 2022, Colour Futures 2020, The Signature Collection, Dulux Trade Commercial Colour Guide, Armstead Colour Guide
System information
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). See Dulux Trade Datasheet 403 for full information before use, available free on request by telephoning 08444 817 818 or visiting duluxtrade.co.uk. Before surface preparation, read the Health & Safety information about old lead paints.
STIR THOROUGHLY BEFORE USE. Apply 1 coat of the appropriate coloured Dulux Trade Undercoat, followed by 1 or 2 coats of Dulux Trade High Gloss. Allow a minimum of 6 hours for the undercoat to dry before applying the gloss finish. Where a second coat of Dulux Trade High Gloss is required, allow a minimum of 16 hours between coats.
For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.
Whilst leading-edge technology has been used in the development of this product, the nature of white solvent-based paints means that they will all discolour over time. The rate of discolouration is faster on areas with no or low natural or UV light. For long-lasting whiteness, we recommend the use of a water-based formulation such as Dulux Trade Quick Dry Gloss.
After use, remove as much paint as possible from brushes before cleaning with brush cleaner.
STIR THOROUGHLY BEFORE USE. Apply 1 coat of the appropriate coloured Dulux Trade Undercoat, followed by 1 or 2 coats of Dulux Trade High Gloss. Allow a minimum of 6 hours for the undercoat to dry before applying the gloss finish. Where a second coat of Dulux Trade High Gloss is required, allow a minimum of 16 hours between coats.
For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.
Whilst leading-edge technology has been used in the development of this product, the nature of white solvent-based paints means that they will all discolour over time. The rate of discolouration is faster on areas with no or low natural or UV light. For long-lasting whiteness, we recommend the use of a water-based formulation such as Dulux Trade Quick Dry Gloss.
After use, remove as much paint as possible from brushes before cleaning with brush cleaner.
Tips & Advice
-
1. CleaningWhite Spirit
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator
Add a new job
Add a new job
Edit job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save Color
91YY 88/072
Save to My Workspace
Add to job
Dulux Trade High Gloss