Products
Products
Dulux Trade Satinwood

Dulux Trade Satinwood

89YY 62/494

Change Colour

Size

1L 2.5L 5L

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key benefits

Tough, durable finish
Self undercoating
Dirt resistant
Solvent-based

Technical Information

Finish Satin
Coverage A guide to the practical coverage which can be achieved under normal conditions is up to 17m² per litre.
Composition Solvent-based

Product Features

EASY TO APPLY

Product Description

Dulux Trade Satinwood is a solvent-based satin finish suitable for use on interior wood and metal surfaces. It is tough, hardwearing and dirt resistant, and does not require an undercoat (except in areas where a strong colour change is required), so it can be applied direct to suitably prepared surfaces.

Application Description

Brush or roller only. For Health & Safety reasons relating to all solvent-based paints, spray application is not recommended. As with all solvent-based paints, do not apply at temperatures below 5ºC (as recommended by British Standard BS 6150).

Technical & Safety Documentation

WARNING. Contains Naphtha (petroleum), hydrotreated heavy. Flammable liquid and vapour. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Keep away from heat, sparks, open flames and hot surfaces. No smoking. Keep container tightly closed. Do not get in eyes, on skin, or on clothing. Call a POISON CENTER or doctor/physician if you feel unwell. Keep cool. Dispose of contents and container in accordance with all local, regional, national or international regulations. Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1), 2-butanone oxime. May produce an allergic reaction. Repeated exposure may cause skin dryness or cracking. Avoid the inhalation of dust. Wear suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. EU limit value for this product (cat A/d): 300g/l (2010). This product contains max. 300g/l VOC. For further advice contact Dulux Paints Ireland Commons Road, Cork Tel: 021 4220222

Download Adobe Reader

Colour Range

True Joy™ - Colour of the Year 2025, Colour Palette Fandeck, RAL Classic, BS4800, Dulux Ireland Mix Lab, Wild Wonder - Colour of the Year 2023, Dulux Colour of the Year 2022, Colour Futures 2020, The Signature Collection, Dulux Trade Commercial Colour Guide, Armstead Colour Guide

System information

STIR THOROUGHLY BEFORE USE. The normal finishing process is 2 full coats of Dulux Satinwood. However, where a strong colour change is required, then a coat of an appropriate coloured Dulux Undercoat may be necessary.
For best colour consistency, purchase sufficient tinted paint for entire job including touch-in at one time from the same source.
NOTE: Whilst leading-edge technology has been used in the development of this product, the nature of white solvent-based paints means that they will all discolour over time. The rate of discolouration is faster on areas with no or low natural or UV light. For long-lasting whiteness, we recommend the use of a water-based formulation such as Dulux Quick Dry Satinwood.

Tips & Advice

1. Cleaning

After use, remove as much product as possible from equipment before cleaning with brush cleaner.
2. Storing

Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright.

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator